Yes, Manual mode is compatible with all our lasers: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, D1 Pro, M1, and F1. And auto-mode is only compatible with P2S, S1, M1 Ultra, and F1 Ultra.

Syncing the AP2 with the engraving machine requires a Bluetooth dongle for information transmission. At present, only the S1, F1 Ultra, M1 Ultra, and P2S meet this requirement.

The diameter size that the product can adapt to is 3 inches，as long as the size of the smoke exhaust pipe of the laser machine meets the requirements.

The AP2 is designed for machines with a smoke extraction capacity of 150 cubic meters per hour or lower. If your machine falls within this range, it should work with the AP2. However, you will need to prepare the adapter for the exhaust port yourself.

The product supports a 3-inch exhaust pipe. It's compatible with laser machines, hybrid 3D printers with laser modules, and FFF 3D printers, as long as their exhaust pipe matches this size.

The lifespan of each filter layer in the AP2:

• Pre-filter: 100 hours
• Medium Efficiency Filter: 200 hours
• Activated Carbon Filter: 600 hours
• Ultra-Dense Carbon Mesh Filter: 300 hours
• High-efficiency filter: 300 hours

Each 100-hour test includes the following: 75 hours engraving basswood, 22 hours cutting 3mm basswood, 2 hours engraving acrylic, and 1 hour cutting 3mm acrylic, conducted on the xTool S1 40W.

*Actual lifespan may vary depending on processing parameters.